Những ngày gần đây, tại xưởng lắp ráp và kiểm tra thiết bị của Viet An, đội ngũ Nghiên cứu – Phát triển và Sản xuất đang phối hợp chặt chẽ cùng khối PE/PS để hoàn thiện những công đoạn cuối cùng trong dự án tích hợp hệ thống giám sát nước – hơi (SWAS) cho một nhà máy luyện nhôm quy mô lớn tại khu vực phía Nam.
Dự án lần này đánh dấu một cột mốc quan trọng khi Việt An triển khai số lượng lớn hệ thống tủ phân tích SWAS, sử dụng toàn bộ thiết bị đến từ SWAN – Thụy Sĩ, thương hiệu hàng đầu toàn cầu trong lĩnh vực giám sát hóa – lý chất lượng nước và hơi nước.
Every component is meticulously inspected before leaving the workshop
At Viet An’s production facility, engineers and technicians are working diligently to finalize key steps — from integrating equipment cabinets to meet technical standards, calibrating parameters according to the configuration of each measurement point, testing signal paths and modules, to packaging the system and preparing complete technical documents and pre-delivery inspection checklists for the customer.
SWAS System Enables Comprehensive Monitoring of the Water & Steam Cycle
This project includes critical monitoring points throughout the power generation process at the plant, specifically:
At the Demineralized Water Treatment Area, the key monitored parameters include:
- pH: monitored by AMI pH-Redox QV-Flow AC
- Conductivity: monitored by AMI Powercon Specific
- Silica concentration: monitored by AMI Silica Analyzer
At the Steam Drum Area, the key monitored parameters include:
- pH: monitored by AMI pH-Redox QV-Flow AC
- Conductivity: monitored by AMI Powercon Specific
- Silica concentration: monitored by AMI Silica Analyzer
- Nồng độ Phosphate: giám sát bởi máy “Analyzer AMI Phosphate HL AC”.
Tại khu vực Hơi Quá Nhiệt (Superheated Steam), các chỉ tiêu quan trọng:
- pH: monitored by AMI pH-Redox QV-Flow AC
- Conductivity: monitored by AMI Powercon Specific
- Silica concentration: monitored by AMI Silica Analyzer
A Sustainable Solution for Safe Operations
The installation and operation of the SWAS system enable the plant to proactively prevent corrosion and scaling in the boiler system, reduce the risk of silica deposits on turbine blades, ensure safe operation, extend equipment lifespan, and comply with strict quality control standards in modern industrial environments. 
"We always prioritize product quality. From receiving and installation to FAT (Factory Acceptance Testing), every step strictly follows our quality control procedures. This project once again affirms Việt An's capability in implementing advanced SWAS systems that meet the rigorous requirements of heavy industrial plants such as thermal power and aluminum factories." shared Mr. Long Tran, Head of R&D and Manufacturing at Viet An Enviro.
The entire system is expected to be delivered and installed at the plant in the near future. Viet An will continue to provide updated photos and information from the site for customers to follow. For more information about the SWAS solution or other water-steam measurement systems, please contact Việt An’s technical consulting team for detailed and professional support.
Head Office
- Address: 4E Street No. 6, An Phu Ward, Thu Duc City, Ho Chi Minh City.
- (Sales) +84 901 379 116 | (Service) +84 901 888 499
Northern Viet An
- Address: Lot 33, BT4-1 area, Trung Van residential project, Trung Van Ward, Nam Tu Liem District, Hanoi.
- (Sales) +84 901 851 116 | (Service) +84 901 888 499
Central Viet An
- Address: 5A Mai Xuan Thuong Street, Hoa Khe Ward, Thanh Khe District, Da Nang City.
- (Sales) +84 898 119 116 | (Service) +84 901 888 499
Vietnamese 
English